All questions

Illinois Rope Operations Practice Test

Browse all practice questions for the Illinois Rope Operations Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Illinois Rope Operations Practice Test 2026 – Comprehensive All-in-One Guide to Exam Success! course image
All questions

These questions are part of the practice quiz. Start practicing

  • Two barrel knots together form which knot?
  • In the climbing setup, how many points of attachment should the climber have when ascending a rope?
  • What type of webbing is most used in rescue?
  • Any bend in a mechanical advantage system should be how much larger than the width of the rope?
  • Which of the following correctly pairs Class with its harness style?
  • What is the minimum diameter rope required in the construction of a simple litter harness?
  • In the chain of command for the rescue operation, how many subordinates does a single supervisor oversee?
  • How much does static kernmantle stretch at its breaking strength?
  • Which statement defines a single anchor?
  • Which description matches the load-sharing anchor concept?
  • When assembling a hasty harness, what should be done with the two loops of webbing?
  • In a multi-anchor system, what happens if one anchor fails?
  • NFPA standard for ropes: design and equipment (also states that rope logs must be kept)?
  • What part of kernmantle rope supports most of the load?
  • Static kernmantle is mainly used in rescue.
  • In rescue operations, who issues commands for slope evacuation and is part of the litter team?
  • What type of litter is rigid or semi-rigid structure that is shaped to hold a victim?
  • At what angle should pickets be driven into the ground?
  • Which statement best defines a basket litter?
  • A tension-less hitch requires a minimum of how many wraps?
  • In the second webbing method, after tying a loop with a water knot, what is the next step?
  • Which belay method uses three wraps around the rope?
  • The end-to-end breaking strength of G-rated components is how many pounds?
  • Block and Creel Construction is a type of construction used for kernmantle rope.
  • The adjustable tie-in for a low-angle litter tender is created by which of the following?
  • Before a rescue operation begins, the equipment should be inspected by which person?
  • Which of the following is NOT a class of anchors?
  • Which knot is commonly used as a backup knot to secure rope lines in climbing systems?
  • Which person is qualified to inspect equipment used in a rescue system?
  • What type of anchor uses two different anchor points and connect together at a single point?
  • During rescue planning, who is responsible for inspecting equipment?
  • What is the ideal angle in an anchor?
  • A good knot is difficult to untie.
  • Which hitch is commonly used to create adjustability in rope systems such as litter harnesses?
  • Which statement is a commonly listed advantage of the load-distributing anchor?
  • What is the term for the maneuver in a marginal landing zone where the helicopter keeps both skids on the ground by running at full power to maintain position?
  • How do you make a prusik wrap?
  • Water knot primary application?
  • This knot is used in a hasty harness and sked/stokes basket work
  • Which NFPA standard addresses rope rescue operations and training?
  • Which person is described as the one who should inspect rescue gear?
  • What is the proper order of haul commands?
  • How much larger must the width be for a tension-less hitch?
  • Nylon rope loses how much strength when wet?
  • A Z-Rig setup provides what mechanical advantage?
  • Which statement correctly describes elongation differences between static and dynamic kernmantle ropes?
  • Which knot is used to equalize a load between two anchors?
  • Which type of harness should be used when there is a risk of inverting?
  • What is a directional rope used for?
  • What size carabiner should be used for a munter hitch?
  • What is the purpose of a progress-capture device?
  • Kernmantle rescue ropes are typically made from which material?
  • Which knot is described as having two loops and being quite strong?
  • Static kernmantle stretches no more than what percent?
  • This type of knot creates a loop for clipping onto or into?
  • Which harness option is commonly recommended for an unconscious victim with the back-shoulder loops?
  • Which statement correctly describes static and dynamic kernmantle elongation?
  • What should be done to prevent rappelling off the end of a rope?
  • Input divided by output = ____________________________ ?
  • In a rescue rope system, which device is used to prevent the litter from moving backward between haul cycles?
  • What rating is intended for the highest loads?
  • What type of brake device should be used for steep slopes with varying terrains?
  • Which statement describes Actual Mechanical Advantage?
  • Which carabiner style is the weakest?
  • What type of harness is best used for an unconscious victim when the loops are on the back shoulders?
  • What is the most common type of material used for rescue rope?
  • Which is the outer covering of a rope?
  • This knot has two loops and is quite strong?
  • What is the span of control for one supervisor in a rescue operation?
  • In kernmantle rope construction, which component is known as the kern or core?
  • Which harness style corresponds to Class 3 harness?
  • In a multi-anchor system, what is true about Self Equalizing anchors?
  • A directional effectively creates what?
  • The water knot is primarily used to tie together which material?
  • What size pulley sheave diameter does a 1/2 inch rope need?
  • What is the purpose of a back-up knot?
  • Which knot is used to tie two webbing pieces together?
  • What is the term used for the outer sheath of kernmantle rope?
  • In rope rescue operations, who should inspect equipment used in a rescue system prior to use?
  • Which knot is a loop at the end of a rope in situations where an 8 on a bight cannot be tied?
  • Technical use ascenders can cut through rope sheaths with loads as low as how much?
  • Which part of a technical rescue ascender determines its strength?
  • When tying off a brake bar rack, which bars must be engaged?
  • Which statement describes a Self Equalizing anchor?
  • Which statement best describes anchor angle practices to minimize load on anchors?
  • 2 person rescue rope is rated to break at what weight?
  • How many methods are described for using webbing on an anchor point?
  • In pre-rescue checks, who should inspect the equipment to ensure proper function?
  • What is the minimum length of picket to ensure that 3 ft are in the ground?
  • Which statement describes Ideal mechanical advantage?
  • The person responsible for inspecting equipment in a rescue system should be which of the following?
  • A foundation knot for the figure 8 on a bend and follow through is the _____________?
  • What mechanical advantage is used to maintain rope strength?
  • Among common carabiner styles, which is the weakest?
  • A tension-less hitch maintains what percentage of rope strength?
  • Which knot technique is used to tie the ends of the prusik cord for a prusik wrap?
  • When attaching two or more mechanical advantage systems together, you count each system's mechanical advantage and then ______ to figure out the total mechanical advantage?
  • Prior to rigging a rescue system, which role should verify equipment inspection?
  • This knot can be pulled from 3 directions and can be tied mid-line?
  • Which term describes joining two rope ends to create a longer rope?
  • In kernmantle rope construction, which component carries most of the rope's strength?
  • During gear checks, who is expected to perform the inspection?
  • The 15 to 1 safety ratio in rescue indicates what about rope strength?
  • How is tubular webbing formed?
  • How much does a two person load weigh?
  • Which gesture signals that a helicopter is clear to take off?
  • NFPA standard for operations and training?
  • Dynamic kernmantle is often used for rescue.
  • What position is assigned to assist the brakeman with rope management?
  • Basket litter is defined as which of the following best describes its construction?
  • Dynamic kernmantle stretches how much?
  • Which range represents the certified gross weight for a Medium Helicopter Type 2?
  • A mechanical device made of metal that uses a camming action to grip the rope is called a _____________?
  • Which action is explicitly discouraged when using a vehicle as an anchor?
  • True or False: Multiple anchors should be used when one anchor may not be sufficient.
  • When using a break bar how many bars should you start with while beginning your rappel?
  • What hitch is used to change over a haul system to a lowering system?
  • Which statement describes a Load Sharing anchor?
  • What knot should be tied at the end of a rappel rope?
  • What is used to secure patients to litters?
  • What positions must you have for every rope rescue?
  • To ensure you don’t descend past the rope end, what should you tie?
  • What load is the minimum that technical use ascenders can cut through rope sheaths?
  • What type of rope is used for rescue rope?
  • Back up knots should be?
  • Nylon's strength loss when wet is 10-15%.
  • How long are litter ties ins?
  • True or False: Depending on the angle of the primary anchor, use of a directional rope may create greater forces on the anchor system than if only a single anchor was used.
  • Output divided by input = __________________________ ?
  • What knot is used to tie two webbing together?
  • Which of the following is listed as a disadvantage of Kevlar rope?
  • What is the term for joining two ropes?
  • Which of the following is NOT considered a good building anchor?
  • Which condition on rope is indicated by an hourglass appearance?
  • Nylon loses how much of its strength when wet?
  • What is the primary purpose of the ears on a rescue 8?
  • What type of knot is used as a safety to a back up knot?
  • Which knot is described as having two loops and is quite strong?
  • For a 1/2 inch rope, the pulley sheave diameter should be how many inches?
  • List an advantage of a load distributing anchor.
  • Class 1 Harness corresponds to which harness style?
  • Dynamic kernmantle rope stretches up to what percentage at failure?
  • Who controls the descent in a rope rescue operation?
  • In SUDOT signaling, which signal indicates Trouble?
  • In rope rescue operations, which person is responsible for inspecting the rescue system equipment?
  • What is the outer sheath of the rope called?
  • Counting rope to determine mechanical advantage can be done using which methods?
  • What is the most common type of soft cam?
  • Which rig is used to achieve a 3:1 mechanical advantage?
  • If a two-person load weighs 600 pounds, what is the weight per person assuming equal distribution?
  • When one anchor may not be sufficient, which approach should be used?
  • Which statement about change of direction anchors is true?
  • What is the best technique to tie a loop of webbing around a vertical anchor so it doesn't slip down?
  • The most accurate test of a rope's true strength would do what to the rope?
  • Which knot is used in webbing when creating an anchor?
  • Which statement about directional ropes is true?
  • Which of the following is NOT listed as a quality of a good knot?
  • Which knot is described as a safety backup to a primary knot in rescue operations?
  • What width of webbing is used to secure patients to litters?
  • Static kernmantle rope elongation under load is best described as which statement?
  • Which of the following is a true statement about load-distributing anchors?
  • In a litter harness lowered with a single line, what is the minimum number of legs to be used?
  • Which statement best describes a characteristic of a 4-wrap tension-less hitch?
  • What is a method of securing a rope to an anchor without using knots?
  • How many bars are on a brake bar rack?
  • For a tension-less hitch, which type of anchor is ideal?
  • Prior to any rope rescue operation, inspection of gear should be performed by which person?
  • The kernmantle rescue rope is typically made of which material?
  • Which statement best describes dynamic kernmantle rope elongation under load?
  • Kern refers to which part in kernmantle rope?
  • What type of litter is recommended for low-angle evacuations?
  • Which knot is used to join two ropes together in rescue contexts?
  • While doing Munter hitch belaying, what should never be removed from the rope?
  • For a rescue setup, who is deemed appropriate to inspect the gear before deployment?
  • What is the core of the rope called?
  • What angle should a load sharing anchor never exceed?
  • When using a vehicle as an anchor, which action should be performed first?
  • In SUDOT signaling, which signal indicates Stop?
  • What are carabiners typically rated at?
  • Which knot is used to tie two webbing together?
  • Which description defines a Medium Helicopter Type 2?
  • Which part of the ascender determines its strength?
  • In a hasty harness, how should the two loops of webbing be secured?
  • What is the function of the brakeman in rope operations?
  • Which litter is recommended for low-angle evacuations?
  • When preparing for a rope rescue, who should perform the equipment inspection?
  • What is the minimum safety rating ratio used in rescue?
  • Which term denotes the rope's outer layer that provides abrasion protection?
  • What allows a simple litter harness to be adjustable?
  • What knot is used to join two ropes together?
  • What construction is used for tubular rescue webbing?
  • Which knot is described as a loop at the end of a rope when an 8 on a bight cannot be tied?
  • For a simple litter harness, which rope diameter is used as the minimum?
  • You should retire rope after exposure to large amounts of water.
  • What is the command used to reduce tension on the rope?
  • G-rated anchors have an end-to-end breaking strength of how many pounds?
  • Which knot is used to tie a loop in webbing around an anchor?
  • Which agency provides regulations for personnel using helicopter rescue techniques?
  • Is a wooden staircase considered a good structural anchor?
  • Who is the litter captain and what is his job?
  • What is the most commonly used belay in a rescue person load?
  • Which standard defines minimum requirements for tech rescuers?
  • Define the L.A.S.T.
  • What is the gesture for alerting a helicopter it is clear to start its engine?
  • In kernmantle rope construction, Kern and Mantle refer to which parts respectively?
  • During planning for a rescue, which individual should inspect the equipment?
  • What is the tensile strength of two inch tubular webbing?
  • Which option is an artificial anchor?
  • Which knot is the most secure backup knot?
  • Litter harnesses have a minimum of how many legs attached to the litter?
  • Which of the following are reasons natural fiber rope is not used in rescue rope?
  • Which NFPA standard requires rope logs to be kept?
  • Which statement expresses a listed disadvantage of Kevlar rope?
  • For the heaviest loads in rope operations, which rating is appropriate?
  • NFPA standard for minimum requirements for all levels of tech rescuers?
  • According to NFPA standards, kernmantle rope is made using continuous core fibers in what type of construction?
  • What type of hitch is used for one person belay?
  • The device known for camming action to grip rope is called?
  • When inspecting rope, what does "hourglass appearance" signify?
  • How many points of attachment should a climber have when ascending a rope?
  • True or False: Using a 1 inch pulley with .5 inch rope creates more friction?
  • When creating an anchor system, the angles used should never exceed ______________?
  • True or False: Natural rope is often used for rescue rope.
  • What is the command to remove excess rope from the system?
  • Who is designated to inspect equipment used in a rescue system?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy